DNE RemoteDirectories Implementation wiki version

From OpenSFS Wiki
Revision as of 12:04, 11 June 2015 by RichardHenwood (talk | contribs) (Created page with "= Implementation milestone 1 = == Milestone Completion Criteria == Per the contract, three Implementation milestones have been defined by Whamcloud. This document is concern...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

Implementation milestone 1

Milestone Completion Criteria

Per the contract, three Implementation milestones have been defined by Whamcloud. This document is concerned with completing the first Implementation milestone which is agreed as: “Demonstrate working DNE code. The sanity.sh and mdsrate-create tests will pass in a DNE environment. Suitable new regression tests for the remote directory functionality will be added and passed, including functional Use Cases for upgrade and downgrade.” These requirements are enumerated as: Demonstrate working DNE code

  • sanity.sh passed.
  • mdsrate-create passed.
  • Regression tests implemented and passed.
  • Upgrade demonstrated.
  • Downgrade demonstrated.

These requirements are demonstrated below.

sanity.sh passed

The results from the sanity.sh run are recorded in maloo at: https://maloo.whamcloud.com/test_sets/4c945302-9bf0-11e1-8837-52540035b04c A screenshot of the page is available as Appendix A: sanity.sh screenshot.

Imp1 fig1.png

Data was collected from a Hyperion test run between April 12th and April 17th 2012. The test configuration included 100 clients, 4 threads on each client, each thread with an individual mount point. Each thread performs 10000 file open/create within unique directories. The units of the y-axis are completed file operations per second.

Regression tests implemented and passed

test_230 has been created to test DNE Remote Directories functionality:

test_230() {
       [ "$MDTCOUNT" -lt "2" ] && skip_env "skipping remote directory test" && return
       local MDTIDX=1

	   mkdir -p $DIR/$tdir/test_230_local
       local mdt_idx=$($GETSTRIPE -M $DIR/$tdir/test_230_local)
       [ $mdt_idx -ne 0 ] &&
                  error "create local directory on wrong MDT $mdt_idx"

       $LFS setdirstripe -i $MDTIDX $DIR/$tdir/test_230 ||
	              error "create remote directory failed"
       local mdt_idx=$($GETSTRIPE -M $DIR/$tdir/test_230)
       [ $mdt_idx -ne $MDTIDX ] &&
                  error "create remote directory on wrong MDT $mdt_idx"

       createmany -o $DIR/$tdir/test_230/t- 10 || error "create files on remote directory failed"
       mdt_idx=$($GETSTRIPE -M $DIR/$tdir/test_230/t-0)
       [ $mdt_idx -ne $MDTIDX ] && error "create files on wrong MDT $mdt_idx"
       rm -r $DIR/$tdir || error "unlink remote directory failed"
}
run_test 230 "Create remote directory and files under the remote directory"

Upgrade demonstrated

Upgrade functionality is demonstrated as part of the test test_32c in conf-sanity: https://maloo.whamcloud.com/test_sets/5cfc5278-9d2e-11e1-8587-52540035b04c

== conf-sanity test 32c: Upgrade with writeconf =================== 14:09:40 (1336932580)
Loading modules from /work/orion_release/orion/lustre-dev/lustre
../libcfs/libcfs/libcfs options: 'libcfs_panic_on_lbug=0'
debug=-1
subsystem_debug=all -lnet -lnd -pinger
../lnet/lnet/lnet options: 'networks=tcp accept=all'
gss/krb5 is not supported
/work/orion_release/orion/lustre-dev/lustre/utils/tunefs.lustre
arch
commit
kernel
list
mdt
ost
sha1sums
Upgrading from disk2_2-ldiskfs.tar.bz2, created with:
  Commit: 2.2
  Kernel: 2.6.32-220.el6_lustre.g4554b65.x86_64
    Arch: x86_64
debug=-1
mount old MDT ....
mkfs new MDT....
mkfs.lustre: Warning: default mount option `errors=remount-ro' is missing
mount new MDT....
Mount client with 2 MDTs 
Create the local directory and files on the old MDT
total: 10 creates in 0.04 seconds: 230.77 creates/second
Verify the MDT index of these files...Pass
Create the remote directory and files on new MDT
total: 10 creates in 0.05 seconds: 188.40 creates/second
Verify the MDT index of these files...Pass
Skip b1_8 images before we have 1.8 compatibility
Skip b1_8 images before we have 1.8 compatibility
Resetting fail_loc on all nodes...done.

Downgrade demonstrated

[[email protected] tests]# sh -vx upgrade_downgrade.sh
#Upgrade tests
#go to lustre 2.3 make old ldiskfs
cd /work/lustre-2.3/lustre/tests
+ cd /work/lustre-2.3/lustre/tests
testnode=${testnode:-"`hostname`"}
hostname
++ hostname
+ testnode=testnode1
LOAD=y sh llmount.sh
+ LOAD=y
+ sh llmount.sh
Loading modules from /work/lustre-2.3/lustre/tests/..
debug=vfstrace rpctrace dlmtrace neterror ha config ioctl super
subsystem_debug=all -lnet -lnd -pinger
../lnet/lnet/lnet options: 'networks=tcp accept=all'
gss/krb5 is not supported
quota/lquota options: 'hash_lqs_cur_bits=3'
set -vx
+ set -vx
../utils/mkfs.lustre --reformat --mgs --mdt --device-size=1048576 /tmp/lustre-mdt-2.3
+ ../utils/mkfs.lustre --reformat --mgs --mdt --device-size=1048576 /tmp/lustre-mdt-2.3
Permanent disk data:
Target: lustre-MDTffff
Index: unassigned
Lustre FS: lustre
Mount type: ldiskfs
Flags: 0x75
(MDT MGS needs_index first_time update )
Persistent mount opts: user_xattr,errors=remount-ro
Parameters:
formatting backing filesystem ldiskfs on /dev/loop0
target name lustre-MDTffff
4k blocks 262144
options -I 512 -i 2048 -q -O dirdata,uninit_bg,dir_nlink,huge_file,flex_bg -E lazy_journal_init -F
mkfs_cmd = mke2fs -j -b 4096 -L lustre-MDTffff -I 512 -i 2048 -q -O dirdata,uninit_bg,dir_nlink,huge_file,flex_bg -E lazy_journal_init -F /dev/loop0 262144
Writing CONFIGS/mountdata
../utils/mkfs.lustre --reformat --mgsnode=$testnode --ost --device-size=1048576 /tmp/lustre-ost-2.3
+ ../utils/mkfs.lustre --reformat --mgsnode=testnode1 --ost --device-size=1048576 /tmp/lustre-ost-2.3
Permanent disk data:
Target: lustre-OSTffff
Index: unassigned
Lustre FS: lustre
Mount type: ldiskfs
Flags: 0x72
(OST needs_index first_time update )
Persistent mount opts: errors=remount-ro,extents,mballoc
Parameters: [email protected]
formatting backing filesystem ldiskfs on /dev/loop0
target name lustre-OSTffff
4k blocks 262144
options -I 256 -q -O extents,uninit_bg,dir_nlink,huge_file,flex_bg -G 256 -E resize=4290772992,lazy_journal_init -F
mkfs_cmd = mke2fs -j -b 4096 -L lustre-OSTffff -I 256 -q -O extents,uninit_bg,dir_nlink,huge_file,flex_bg -G 256 -E resize=4290772992,lazy_journal_init -F /dev/loop0 262144
Writing CONFIGS/mountdata
mount -t lustre -o loop,user_xattr,acl /tmp/lustre-mdt-2.3 /mnt/mds
+ mount -t lustre -o loop,user_xattr,acl /tmp/lustre-mdt-2.3 /mnt/mds
mount -t lustre -o loop /tmp/lustre-ost-2.3 /mnt/ost1
+ mount -t lustre -o loop /tmp/lustre-ost-2.3 /mnt/ost1
mount -t lustre $testnode:/lustre /mnt/lustre
+ mount -t lustre testnode1:/lustre /mnt/lustre
cp /etc/fstab /mnt/lustre
+ cp /etc/fstab /mnt/lustre
cp /etc/hosts /mnt/lustre
+ cp /etc/hosts /mnt/lustre
umount /mnt/lustre
+ umount /mnt/lustre
umount /mnt/ost1
+ umount /mnt/ost1
umount /mnt/mds
+ umount /mnt/mds
losetup -d /dev/loop0
+ losetup -d /dev/loop0
losetup -d /dev/loop1
+ losetup -d /dev/loop1
losetup -d /dev/loop2
+ losetup -d /dev/loop2
ioctl: LOOP_CLR_FD: No such device or address
losetup -d /dev/loop3
+ losetup -d /dev/loop3
ioctl: LOOP_CLR_FD: No such device or address
losetup -d /dev/loop4
+ losetup -d /dev/loop4
ioctl: LOOP_CLR_FD: No such device or address
losetup -d /dev/loop5
+ losetup -d /dev/loop5
ioctl: LOOP_CLR_FD: No such device or address
losetup -d /dev/loop6
+ losetup -d /dev/loop6
ioctl: LOOP_CLR_FD: No such device or address
losetup -d /dev/loop7
+ losetup -d /dev/loop7
ioctl: LOOP_CLR_FD: No such device or address
LOAD=y sh llmountcleanup.sh
+ LOAD=y
+ sh llmountcleanup.sh
Stopping clients: testnode1 /mnt/lustre (opts:-f)
Stopping clients: testnode1 /mnt/lustre2 (opts:-f)
osd_ldiskfs 296768 0 
fsfilt_ldiskfs 119600 0 
mdd 426496 3 osd_ldiskfs,cmm,mdt
ldiskfs 354264 2 osd_ldiskfs,fsfilt_ldiskfs
jbd2 101384 3 osd_ldiskfs,fsfilt_ldiskfs,ldiskfs
crc16 35328 1 ldiskfs
obdclass 1109104 29 llite_lloop,lustre,obdfilter,ost,osd_ldiskfs,cmm,fsfilt_ldiskfs,mdt,mdd,mds,mgs,mgc,lov,osc,mdc,lmv,fid,fld,lquota,ptlrpc
lvfs 72256 22 llite_lloop,lustre,obdfilter,ost,osd_ldiskfs,cmm,fsfilt_ldiskfs,mdt,mdd,mds,mgs,mgc,lov,osc,mdc,lmv,fid,fld,lquota,ptlrpc,obdclass
libcfs 344320 24 llite_lloop,lustre,obdfilter,ost,osd_ldiskfs,cmm,fsfilt_ldiskfs,mdt,mdd,mds,mgs,mgc,lov,osc,mdc,lmv,fid,fld,lquota,ptlrpc,obdclass,lvfs,ksocklnd,lnet
exportfs 39296 2 fsfilt_ldiskfs,nfsd
modules unloaded.
echo "go to DNE branch do upgrade"
+ echo 'go to DNE branch do upgrade'
go to DNE branch do upgrade
cd /work/lustre-dne/lustre/tests
+ cd /work/lustre-dne/lustre/tests
LOAD=y sh llmount.sh
+ LOAD=y
+ sh llmount.sh
Loading modules from /work/lustre-dne/lustre/tests/..
../libcfs/libcfs/libcfs options: 'libcfs_panic_on_lbug=0'
debug=vfstrace rpctrace dlmtrace neterror ha config ioctl super
subsystem_debug=all -lnet -lnd -pinger
../lnet/lnet/lnet options: 'networks=tcp accept=all'
gss/krb5 is not supported
mount -t lustre -o loop,user_xattr,acl,abort_recov,write_conf /tmp/lustre-mdt-2.3 /mnt/mds1
+ mount -t lustre -o loop,user_xattr,acl,abort_recov,write_conf /tmp/lustre-mdt-2.3 /mnt/mds1
../utils/mkfs.lustre --reformat --mgsnode=$testnode --mdt --device-size=1048576 --index 1 /tmp/lustre-mdt-new
+ ../utils/mkfs.lustre --reformat --mgsnode=testnode1 --mdt --device-size=1048576 --index 1 /tmp/lustre-mdt-new
Permanent disk data:
Target: lustre:MDT0001
Index: 1
Lustre FS: lustre
Mount type: ldiskfs
Flags: 0x61
(MDT first_time update )
Persistent mount opts: user_xattr,errors=remount-ro
Parameters: [email protected]
formatting backing filesystem ldiskfs on /dev/loop1
target name lustre:MDT0001
4k blocks 262144
options -I 512 -i 2048 -q -O dirdata,uninit_bg,dir_nlink,huge_file,flex_bg -E lazy_journal_init -F
mkfs_cmd = mke2fs -j -b 4096 -L lustre:MDT0001 -I 512 -i 2048 -q -O dirdata,uninit_bg,dir_nlink,huge_file,flex_bg -E lazy_journal_init -F /dev/loop1 262144
Writing CONFIGS/mountdata
mount -t lustre -o loop,user_xattr,acl,abort_recov,write_conf /tmp/lustre-mdt-new /mnt/mds2
+ mount -t lustre -o loop,user_xattr,acl,abort_recov,write_conf /tmp/lustre-mdt-new /mnt/mds2
mount -t lustre -o loop,abort_recov,write_conf /tmp/lustre-ost-2.3 /mnt/ost1
+ mount -t lustre -o loop,abort_recov,write_conf /tmp/lustre-ost-2.3 /mnt/ost1
mount -t lustre $testnode:/lustre /mnt/lustre
+ mount -t lustre testnode1:/lustre /mnt/lustre
diff /mnt/lustre/fstab /etc/fstab || { echo "the file is diff1" && exit 1; }
+ diff /mnt/lustre/fstab /etc/fstab
diff /mnt/lustre/hosts /etc/hosts || { echo "the file is diff1" && exit 1; }
+ diff /mnt/lustre/hosts /etc/hosts
../utils/lfs setdirstripe -i 1 /mnt/lustre/test_mdt1 || { echo "create remote directory failed" && exit 1; }
+ ../utils/lfs setdirstripe -i 1 /mnt/lustre/test_mdt1
mdt_idx=$(../utils/lfs getstripe -M /mnt/lustre/test_mdt1)
../utils/lfs getstripe -M /mnt/lustre/test_mdt1
++ ../utils/lfs getstripe -M /mnt/lustre/test_mdt1
+ mdt_idx=1
[ $mdt_idx -ne 1 ] && { echo "create remote directory on wrong MDT" && exit 1; }
+ '[' 1 -ne 1 ']'

mkdir /mnt/lustre/test_mdt1/dir
+ mkdir /mnt/lustre/test_mdt1/dir
mdt_idx=$(../utils/lfs getstripe -M /mnt/lustre/test_mdt1/dir)
../utils/lfs getstripe -M /mnt/lustre/test_mdt1/dir
++ ../utils/lfs getstripe -M /mnt/lustre/test_mdt1/dir
+ mdt_idx=1
[ $mdt_idx -ne 1 ] && { echo "create remote directory on wrong MDT" && exit 1; }
+ '[' 1 -ne 1 ']'
cp /mnt/lustre/hosts /mnt/lustre/test_mdt1/dir/hosts
+ cp /mnt/lustre/hosts /mnt/lustre/test_mdt1/dir/hosts
cp /mnt/lustre/fstab /mnt/lustre/test_mdt1/dir/fstab
+ cp /mnt/lustre/fstab /mnt/lustre/test_mdt1/dir/fstab
echo "downgrade DNE to single MDT"
+ echo 'downgrade DNE to single MDT'
downgrade DNE to single MDT
mkdir /mnt/lustre/test_mdt1_backup
+ mkdir /mnt/lustre/test_mdt1_backup
cp -R /mnt/lustre/test_mdt1/ /mnt/lustre/test_mdt1_backup/
+ cp -R /mnt/lustre/test_mdt1/ /mnt/lustre/test_mdt1_backup/
../utils/lctl dk > /tmp/debug.out
+ ../utils/lctl dk
umount /mnt/lustre/
+ umount /mnt/lustre/
umount /mnt/mds2
+ umount /mnt/mds2
umount /mnt/mds1
+ umount /mnt/mds1
umount /mnt/ost1
+ umount /mnt/ost1
LOAD=y sh llmountcleanup.sh
+ LOAD=y
+ sh llmountcleanup.sh
Stopping clients: testnode1 /mnt/lustre (opts:-f)
Stopping clients: testnode1 /mnt/lustre2 (opts:-f)
osd_ldiskfs 343056 0 
fsfilt_ldiskfs 43776 0 
ldiskfs 354392 2 osd_ldiskfs,fsfilt_ldiskfs
mdd 338320 3 osd_ldiskfs,cmm,mdt
fld 113776 7 osd_ldiskfs,lod,obdfilter,cmm,mdt,lmv,fid
obdclass 1221936 28 llite_lloop,lustre,osd_ldiskfs,osp,lod,obdfilter,ost,cmm,mdt,mdd,mgs,mgc,lov,osc,mdc,lmv,fid,fld,ptlrpc
lvfs 59024 22 llite_lloop,lustre,osd_ldiskfs,fsfilt_ldiskfs,osp,lod,obdfilter,ost,cmm,mdt,mdd,mgs,mgc,lov,osc,mdc,lmv,fid,fld,ptlrpc,obdclass
libcfs 344192 24 llite_lloop,lustre,osd_ldiskfs,fsfilt_ldiskfs,osp,lod,obdfilter,ost,cmm,mdt,mdd,mgs,mgc,lov,osc,mdc,lmv,fid,fld,ptlrpc,obdclass,lvfs,ksocklnd,lnet
jbd2 101384 2 osd_ldiskfs,ldiskfs
crc16 35328 1 ldiskfs
modules unloaded.
losetup -d /dev/loop0
+ losetup -d /dev/loop0
losetup -d /dev/loop1
+ losetup -d /dev/loop1
losetup -d /dev/loop2
+ losetup -d /dev/loop2
losetup -d /dev/loop3
+ losetup -d /dev/loop3
ioctl: LOOP_CLR_FD: No such device or address
losetup -d /dev/loop4
+ losetup -d /dev/loop4
ioctl: LOOP_CLR_FD: No such device or address
losetup -d /dev/loop5
+ losetup -d /dev/loop5
ioctl: LOOP_CLR_FD: No such device or address
losetup -d /dev/loop6
+ losetup -d /dev/loop6
ioctl: LOOP_CLR_FD: No such device or address
losetup -d /dev/loop7
+ losetup -d /dev/loop7
ioctl: LOOP_CLR_FD: No such device or address
cd /work/lustre-2.3/lustre/tests
+ cd /work/lustre-2.3/lustre/tests
LOAD=y sh llmount.sh
+ LOAD=y
+ sh llmount.sh
Loading modules from /work/lustre-2.3/lustre/tests/..
debug=vfstrace rpctrace dlmtrace neterror ha config ioctl super
subsystem_debug=all -lnet -lnd -pinger
../lnet/lnet/lnet options: 'networks=tcp accept=all'
gss/krb5 is not supported
quota/lquota options: 'hash_lqs_cur_bits=3'
/work/lustre-2.3/lustre/utils/tunefs.lustre --writeconf /tmp/lustre-mdt-2.3
+ /work/lustre-2.3/lustre/utils/tunefs.lustre --writeconf /tmp/lustre-mdt-2.3
checking for existing Lustre data: found CONFIGS/mountdata
Reading CONFIGS/mountdata
Read previous values:
Target: lustre-MDT0000
Index: 0
Lustre FS: lustre
Mount type: ldiskfs
Flags: 0x5
(MDT MGS )
Persistent mount opts: user_xattr,errors=remount-ro
Parameters:
Permanent disk data:
Target: lustre-MDT0000
Index: 0
Lustre FS: lustre
Mount type: ldiskfs
Flags: 0x105
(MDT MGS writeconf )
Persistent mount opts: user_xattr,errors=remount-ro
Parameters:
Writing CONFIGS/mountdata
/work/lustre-2.3/lustre/utils/tunefs.lustre --writeconf /tmp/lustre-ost-2.3
+ /work/lustre-2.3/lustre/utils/tunefs.lustre --writeconf /tmp/lustre-ost-2.3
checking for existing Lustre data: found CONFIGS/mountdata
Reading CONFIGS/mountdata
Read previous values:
Target: lustre-OST0000
Index: 0
Lustre FS: lustre
Mount type: ldiskfs
Flags: 0x2
(OST )
Persistent mount opts: errors=remount-ro,extents,mballoc
Parameters: [email protected]
Permanent disk data:
Target: lustre-OST0000
Index: 0
Lustre FS: lustre
Mount type: ldiskfs
Flags: 0x102
(OST writeconf )
Persistent mount opts: errors=remount-ro,extents,mballoc
Parameters: [email protected]
Writing CONFIGS/mountdata
mount -t lustre -o loop,user_xattr,acl,abort_recov /tmp/lustre-mdt-2.3 /mnt/mds
+ mount -t lustre -o loop,user_xattr,acl,abort_recov /tmp/lustre-mdt-2.3 /mnt/mds
mount -t lustre -o loop,abort_recov /tmp/lustre-ost-2.3 /mnt/ost1
+ mount -t lustre -o loop,abort_recov /tmp/lustre-ost-2.3 /mnt/ost1
mount -t lustre $testnode:/lustre /mnt/lustre
+ mount -t lustre testnode1:/lustre /mnt/lustre
diff /mnt/lustre/fstab /etc/fstab || { echo "the file is different" && exit 1; }
+ diff /mnt/lustre/fstab /etc/fstab
diff /mnt/lustre/hosts /etc/hosts || { echo "the file is different" && exit 1; }
+ diff /mnt/lustre/hosts /etc/hosts
diff /mnt/lustre/test_mdt1_backup/test_mdt1/dir/fstab /etc/fstab || { echo "the file is different" && exit 1; }
+ diff /mnt/lustre/test_mdt1_backup/test_mdt1/dir/fstab /etc/fstab
diff /mnt/lustre/test_mdt1_backup/test_mdt1/dir/hosts /etc/hosts || { echo "the file is different" && exit 1; }
+ diff /mnt/lustre/test_mdt1_backup/test_mdt1/dir/hosts /etc/hosts
umount /mnt/lustre
+ umount /mnt/lustre
umount /mnt/mds
+ umount /mnt/mds
umount /mnt/ost1
+ umount /mnt/ost1