UW SSEC Lustre Statistics How-To

From OpenSFS
Revision as of 14:42, 12 April 2015 by AndrewWagner (talk | contribs)
Jump to: navigation, search

Introduction

This guide will take the user step-by-step through the Lustre Monitoring deployment that the Space Science and Engineering Center uses for monitoring all of its Lustre file systems. The author of this guide is Andrew Wagner (andrew.wagner@ssec.wisc.edu).

Hardware Requirements

Any existing server can be used for a proof of concept version of this guide. The requirements for several thousands checks per minute are low - a small VM can easily handle the load.

Our productions server can easily handle ~150k checks per minute and from a processing/disk I/O perspective can handle much more. Here are the specs:

  • Dell PowerEdge R515
    • 2x 8-Core AMD Opteron 4386
    • 300GB RAID1 15K SAS
    • 200GB Enterprise SSD
    • 64GB RAM

Building the Lustre Monitoring Deployment

Setting up an OMD Monitoring Server

The first thing that we needed for our new monitoring deployment was a monitoring server. We were already using Check_MK with Nagios on our older monitoring server but the Open Monitoring Distribution nicely ties all of the components together. The distribution is available at http://omdistro.org/ and installs via RPM.

On a newly deployed Centos6 machine, I installed the OMD-1.20 RPM. This takes care of all of the work of installing Nagios, Check_MK, PNP4Nagios, etc.

After installation, I created the new OMD monitoring site:

omd create ssec

This creates a new site that runs its own stack of Apache, Nagios, Check_MK and everything else in the OMD distribution. Now we can start the site:

omd start ssec

You can now nagivate to http://example.fqdn.com/sitename of your server, i.e. http://example.ssec.wisc.edu/ssec and login with the default OMD credentials.

We chose to setup LDAPS authentication versus our Active Directory server to manage authentication. There is a good discussion of how to do this here: https://mathias-kettner.de/checkmk_multisite_ldap_integration.html

Additionally, we setup HTTPS for our web access to OMD: http://lists.mathias-kettner.de/pipermail/checkmk-en/2014-May/012225.html

At this point, you can start configuring your monitoring server to monitor hosts! Check_MK has a lot of configuration options, but it's a lot better than managing Nagios configurations by hand. Fortunately, Check_MK is widely used and well documented. The Check_MK documentation root is available at http://mathias-kettner.de/checkmk.html.

Deploying Agents to Lustre Hosts

To operate, the Check_MK agent on hosts runs as an xinetd service with a config file at /etc/xinetd.d/check_mk. That file includes the IP addresses allowed to access the agent in the only_from parameter. The OMD distribution comes with Check_MK agent RPMs. I rebuilt the RPM using rpmrebuild to include our updated IP addresses for our monitoring servers.

After rebuilding the RPM, push out the RPM to all hosts that will be monitored. We use a custom repository and Puppet for managing our existing software, so adding the RPM to the repo and pushing out via Puppet can be done with a simple module.

After deployment, we can verify the agents work by adding them to Check_MK via the GUI or configuration file and inventorying them. This will allow us to monitor a wide array of default metrics such as

Writing Local Checks to Run via Check_MK Agent

Now that the Check_MK agents are deployed to the Lustre servers, we can add Check_MK local agent checks to measure whatever we want. The documentation for local checks is here: http://mathias-kettner.de/checkmk_localchecks.html.

The output of the check has to have a Nagios status number, Name, Performance Data, and Check Output.

Check out the examples in the Check_MK documentation for formatting of output. You can use whatever language your server supports to execute the local check. At SSEC, Scott Nolin has implemented several Perl scripts to poll Lustre statistics and output in the Check_MK format. You can read more about the checks here: http://wiki.opensfs.org/Lustre_Statistics_Guide.

Check_MK RRD Graphs

Once you start collecting this performance data

Deploying Graphite/Carbon

Deploying Grafana

Using Graphios to Redirect Lustre Stats to Carbon