UW SSEC Lustre Statistics How-To

From OpenSFS
Revision as of 10:36, 23 March 2015 by AndrewWagner (talk | contribs)
Jump to: navigation, search

Introduction

This guide will take the user step-by-step through the Lustre Monitoring deployment that the Space Science and Engineering Center uses for monitoring all of its Lustre file systems. The author of this guide is Andrew Wagner (andrew.wagner@ssec.wisc.edu).

Hardware Requirements

Building the Lustre Monitoring Deployment

Setting up an OMD Monitoring Server

The first thing that we needed for our new monitoring deployment was a monitoring server. We were already using Check_MK with Nagios on our older monitoring server but the Open Monitoring Distribution nicely ties all of the components together. The distribution is available at http://omdistro.org/ and installs via RPM.

On a newly deployed Centos6 machine, I installed the OMD-1.20 RPM. This takes care of all of the work of installing Nagios, Check_MK, PNP4Nagios, etc.

After installation, I created the new OMD monitoring site:

omd create ssec

This creates a new site that runs its own stack of Apache, Nagios, Check_MK and everything else in the OMD distribution. Now we can start the site:

omd start ssec

You can now nagivate to http://example.fqdn.com/sitename of your server, i.e. http://example.ssec.wisc.edu/ssec and login with the default OMD credentials.

We chose to setup LDAPS authentication versus our Active Directory server to manage authentication. There is a good discussion of how to do this here: https://mathias-kettner.de/checkmk_multisite_ldap_integration.html

Additionally, we setup HTTPS for our web access to OMD: http://lists.mathias-kettner.de/pipermail/checkmk-en/2014-May/012225.html

At this point, you can start configuring your monitoring server to monitor hosts! Check_MK has a lot of configuration options, but it's a lot better than managing Nagios configurations by hand. Fortunately, Check_MK is widely used and well documented.

Deploying Agents to Lustre Hosts

To operate, the check_mk_agent on hosts runs as an xinetd service with a config file at /etc/xinetd.d/check_mk. That file includes the IP addresses allowed to access the agent in the only_from parameter. I rebuilt the RPM using rpmrebuild to include our updated IP addresses.

After rebuilding the RPM, push out the RPM to all hosts that will be monitored. We use a custom repository and Puppet for managing our existing software, so adding the RPM to the repo and pushing out via Puppet can be done with a simple module.

Writing Local Checks to Run via Agents

Check_MK RRD Graphs

Deploying Graphite/Carbon

Deploying Grafana

Using Graphios to Redirect Lustre Stats to Carbon